We have provided you with class 11 chemistry chapter 1 MCQ questions with answers and if you want to score well then you should learn some basic concepts of chemistry MCQ. Thus here, You can download MCQ questions for class 11 chemistry chapter 1 pdf in a simple and complete manner with the goal that you can undoubtedly get a handle on those concepts and sections.
These MCQs will also help you to make your preparation better in solving the extra and inside questions that are asked in board exams. Class 11 chemistry chapter 1 MCQ will also help in understanding the chapters correctly as they will contain the significant focuses for revision purposes in brief time frames.
Please refer to the MCQ Questions for Class 11 Chemistry Chapter 1 Some Basic Concepts of Chemistry with Answers. The following Some Basic Concepts of Chemistry Class 11 Chemistry MCQ Questions have been designed based on the latest syllabus and examination pattern for Class 11. Our experts have designed MCQ Questions for Class 11 Chemistry with Answers for all chapters in your NCERT Class 11 Chemistry book.
Some Basic Concepts of Chemistry Class 11 MCQ Questions with Answers
See below Some Basic Concepts of Chemistry Class 11 Chemistry MCQ Questions, solve the questions and compare your answers with the solutions provided below.
Question. The maximum number of molecules are present in
(a) 15 L of H2 gas at STP
(b) 5 L of N2 gas at STP
(c) 0.5 g of H2 gas
(d) 10 g of O2 gas
Question. The number of water molecules in 250 mL of water is closest to [Given, density of water is 1.0 g mL–1; Avogadro’s number = 6.023 × 1023]
(a) 83.6 × 1023
(b) 13.9 × 1023
(c) 1.5 × 1023
(d) 33.6 × 1023
Question. A metal oxide has the formula Z2O3. It can be reduced by hydrogen to give free metal and water. 0.1596 g of the metal oxide requires 6 mg of hydrogen for complete reduction. The tomic weight of the metal is
Question. Number of moles of MnO4– required to oxidize one mole of ferrous oxalate completely in acidic medium will be
(a) 0.6 moles
(b) 0.4 moles
(c) 7.5 moles
(d) 0.2 moles
Question. A metallic chloride contain 47.22% metal. Calculate the equivalent weight of metal.
Question. 10 g CaCO3 were dissolved in 250 mL of 100 M HCl or the solution was boiled. What volume of 2M KOH would be required to equivalence point after boiling? Assume no change in olume during boiling.
(a) 50 mL
(b) 25 mL
(c) 75 mL
(d) 60 mL
Question. The density of 3M solution of sodium chloride is 1.252 g mL–1. The molality of the solution will be : (molar mass, NaCl = 58.5 g mol–1)
(a) 260 m
(b) 2.18 m
(c) 2.79 m
(d) 3.00 m
Question. 2 g of a mixture of CO and CO2 on reaction with excess I2O5 produced 2.54 g of I2. What would be the mass % of CO2 in the original mixture?
Question. 3.0 g of oxalic acid [(CO2H)2.2H2O] is dissolved in a solvent to prepare a 250 mL solution. The density of the solution is 1.9 g/mL. The molality and normality of the solution, espectively, are closest to
(a) 0.10 and 0.38
(b) 0.10 and 0.19
(c) 0.05 and 0.19
(d) 0.05 and 0.09
Question. How many moles of P4O6 and P4O10 will be produced by the combustion of 12.4 g of phosphorous (atomic mass 31) in 12.8 g of oxygen, leaving no P4 or O2?
(a) 0.1 and 0.3 mol
(b) 0.15 mol and 0.25 mol
(c) 0.05 mol each
(d) 0.1 mol each
Question. The number of moles of water present in a spherical water droplet of radius 1.0 cm is [Given: density of water in the droplet = 1.0 g cm–3]
(a) π /18
(b) 2π /27
(d) 2π /9
Question. If potassium chlorate is 80% pure, then 48 g of oxygen would be produced from (atomic mass of K =39)
(a) 153.12 g of KClO3
(b) 122.5 g of KClO3
(c) 245 g of KClO3
(d) 98 g of KClO3
Question. 5 g sample contain only Na2CO3 and Na2SO4. This sample is dissolved and the volume made up to 250 mL. 25 mL of this solution neutralizes 20 mL of 0.1 M H2SO4. Calculate the of Na2SO4 in the sample.
Question. The dimensions of pressure are the same as that of
(a) force per unit volume
(b) energy per unit volume
Question. Given the numbers : 161 cm, 0.161 cm, 0.0161 cm. The number of significant figures for the three numbers is
(a) 3, 3 and 4 respectively
(b) 3, 4 and 4 respectively
(c) 3, 4 and 5 respectively
(d) 3, 3 and 3 respectively.
Question. Equal masses of H2, O2 and methane have been taken in a container of volume V at temperature 27 °C in identical conditions. The ratio of the volumes of gases H2 : O2 : methane ould be
(a) 8 : 16 : 1
(b) 16 : 8 : 1
(c) 16 : 1 : 2
(d) 8 : 1 : 2
Question. What volume of oxygen gas (O2) measured at 0°C and 1 atm, is needed to burn completely 1 L of propane gas (C3H8) measured under the same conditions?
(a) 5 L
(b) 10 L
(c) 7 L
(d) 6 L
Question. 0.24 g of a volatile gas, upon vaporisation, gives 45 mL vapour at NTP. What will be the vapour density of the substance? (Density of H2 = 0.089 g/L)
Question. 1 mole of equimolar mixture of ferric oxalate and ferrous oxalate requires x mole of KMnO4 in acidic medium for complete oxidation. x is:
(a) 0.5 mole
(b) 0.9 mole
(c) 1.2 mole
(d) 4.5 mole
Question. Two solutions of a substance (non electrolyte) are mixed in the following manner. 480 mL of 1.5 M first solution + 520 mL of 1.2 M second solution. What is the molarity of the final ixture?
(a) 2.70 M
(b) 1.344 M
(c) 1.50 M
(d) 1.20 M
Question. The molecular weight of O2 and SO2 are 32 and 64 respectively. At 15°C and 150 mmHg pressure, one litre of O2 contains ‘N’ molecules. The number of molecules in two litres of O2 under the same conditions of temperature and pressure will be
(c) 2 N
(d) 4 N
Question. What is the weight of oxygen required for the complete combustion of 2.8 kg of ethylene?
(a) 2.8 kg
(b) 6.4 kg
(c) 9.6 kg
(d) 96 kg
Question. An element, X has the following isotopic composition : 200X : 90% 199X : 8.0% 202X : 2.0% The weighted average atomic mass of the naturally occurring element X is closest to
(a) 201 amu
(b) 202 amu
(c) 199 amu
(d) 200 amu
Question. Boron has two stable isotopes, 10B(19%) and 11B(81%). Calculate average at. wt. of boron in the periodic table.
Question. Suppose the elements X and Y combine to form two compounds XY2 and X3Y2. When 0.1 mole of XY2 weighs 10 g and 0.05 mole of X3Y2 weighs 9 g, the atomic weights of X and Y re
(a) 40, 30
(b) 60, 40
(c) 20, 30
(d) 30, 20
Question. If Avogadro number NA, is changed from 6.022 × 1023 mol–1 to 6.022 × 1020 mol–1, this would change
(a) the mass of one mole of carbon
(b) the ratio of chemical species to each other in a balanced equation
(c) the ratio of elements to each other in a compound
(d) the definition of mass in units of grams.
Question. The number of water molecules is maximum in
(a) 1.8 gram of water
(b) 18 gram of water
(c) 18 moles of water
(d) 18 molecules of water.
Question. A mixture of gases contains H2 and O2 gases in the ratio of 1 : 4 (w/w). What is the molar ratio of the two gases in the mixture?
(a) 16 : 1
(b) 2 : 1
(c) 1 : 4
(d) 4 : 1
Question. Which one of the followings has maximum number of atoms?
(a) 1 g of Ag(s) [Atomic mass of Ag = 108]
(b) 1 g of Mg(s) [Atomic mass of Mg = 24]
(c) 1 g of O2(g) [Atomic mass of O = 16]
(d) 1 g of Li(s) [Atomic mass of Li = 7]
Question. In which case is number of molecules of water maximum?
(a) 18 mL of water
(b) 0.18 g of water
(c) 0.00224 L of water vapours at 1 atm and 273 K
(d) 10–3 mol of water
Class 11 Chemistry Chapter 1 MCQ Questions with Answers will assist the student with understanding the chapter in a great way. Besides, these MCQs will fill in as the best revision materials during the class 11 board exam. Aside from Class 11 Some Basic Concepts of Chemistry MCQ, we have also provided Revision Notes and sample papers to assist students with ably planning for the board exam.
We trust the given MCQ Questions for Class 11 Chemistry Chapter 1 Pdf free download will help you. Assuming that you have any questions in regards to Class 11 chemistry chapter 1 mcq, write a comment below and we will hit you up at the earliest.