MCQs For NCERT Class 9 Computer Science Computer Components

Please refer to the MCQ Questions for Class 9 Computer Science Computer Components with Answers. The following Computer Components Class 9 Computer Science MCQ Questions have been designed based on the current academic year syllabus and examination guidelines for Class 9. Our faculty has designed MCQ Questions for Class 9 Computer Science with Answers for all chapters as per your NCERT Class 9 Computer Science book.

Computer Components Class 9 MCQ Questions with Answers

Please see below Computer Components Class 9 Computer Science MCQ Questions, solve the questions and compare your answers with the solutions provided below.

Question. A ———————– is composed of set of communication lines or wires.
(a).BUS
(b).USB
(c).Port
(d).Connector

Question. Capacity of bus depends upon the number of ——————— it contains.
(a).datalines
(b).bit lines
(c).control lines
(d).port lines

Question. Address bus only connects ——————– and ——————-
(a). CU, ALU
(b).CPU, RAM
(c).CPU, Monitor
(d).CPU, ROM

Question. If an address bus has 8 lines, the maximum number of memory locations that can be addressed are —–
(a).256
(b).255
(c).128
(d).1024

Question. Control bus carries ——————————- from control unit to other units
(a).data information
(b).control information
(c).address information
(d).only information

Question. ———————-directs the transfer of data from memory to the ALU
(a).CU
(b).ALU
(c).CPU
(d).ROM

Question. Computer storage is also referred to as computer —————–.
(a).cache
(b).Memory
(c).processing
(d).program

Question. Parallel port is much —————- than serial port
(a).Equal
(b).similar
(c).faster
(d).slower

Question. Parallel port can transmit —————— bits of data at a time.
(a).9
(b).25
(c).64
(d).32

Question. Most devices that send and receive large amount of data, use ——————- ports
(a).parallel ports
(b).COM ports
(c).Ports
(d).None

Question. There are ————— type of computer memory.
(a).two
(b).three
(c).four
(d).five

Question. ———– memory is directly accessible by the processing unit.
(a).main
(b).secondary
(c).tape drive
(d).CD ROM

Question. Through ———————— devices we feed data to the computer.
(a).hardware
(b).pointing devices
(c).input device
(d).display devices

Question. USB has a maximum bandwidth of ————————
(a).8Mbits/sec
(b). 12Mbits/sec
(c). 24Mbits/sec
(d). 64Mbits/sec

Question. Up to ———————– devices can be attached with USB
(a).132
(b).124
(c).126
(d).127

Question. Tape drive is ——————- device
(a).storage
(b).processing
(c).input
(d).output

Question. Computer after processing data gives output through some devices called—-
(a).output devices
(b).pointing devices
(c).input device
(d).display devices

Question. A socket that enables and external device to be attached to the computer is called——————-
(a).USB
(b).connector
(c).Bus
(d).Port

Question. All communication with the external devices is the result of properly connected———————-
(a).bus
(b).USB
(c).port
(d).connector

Question. As soon as the computer is switched off the —- of the main memory are lost.
(a).address
(b).signals
(c).contents
(d).text

Question. The additional memory required in all computer systems is called————-
(a).secondary memory
(b).tertiary memory
(c).primary memory
(d).main memory

Fill in the blanks :-

Question. EAROM stands for________________________:____________.

Question. __________performs different arithmetical and logical operations such as addition, subtraction, division and logical comparison on numerical data in the binary system.

Question. The capacity of a storage device is expressed as number of_____.

Question. One__________is a group of eight bits that forms one character.

Question. A computer along with its peripheral devices is called as______.

Question. The work carried out by a computer system is known as _______which means the use of electronic machine to derive results.

Question. A computer system has two major divisions known as______and________.